- 00 Maintenance schedule
- 00 Timed life components
- 01 Preparation
- 02 Fluids and Consumables
- 03 Engine
- 04 Paddle shifter
- 05 Brakes
- 06 Chain
- 07 Fuel
- 08 Differential
- 09 Dash
- 10 Suspension
- 11 Gearing
- 12 Damper settings
- 13 Torque settings
- 14 Corner weights
- 15 On-track preparation checklist
- 16 Wiring diagram
- 17 Trailering
Dash
The AIM MyChron 3XG Log system is generally the standard system used on the Stohr. It comes with an owners manual. Shift the stock motor at 10,500rpm.
Oil pressure at speed under throttle should be 45-55psi. At idle the pressure can drop to 5psi, setting off a low pressure alarm. Oil temperature should run 220-230 F, although it will not damage the motor if it gets to 280 momentarily.
Water temperature should be around 190 deg F. Try not to exceed 220. Most cars come with the stock thermostat installed. This can be removed if desired.
Updated on 11 Apr 2024